Fluoride is Good For The Dumbing Down Process and the Culling of the Sheeple !

[/tab]

.

Fluoride is Good For The Dumbing Down Process and the Culling of the Sheeple !


[youtube:2ll8x8si]http://www.youtube.com/watch?v=IZBDAChKWZM[/youtube]2ll8x8si]


.
.

[Wimpy]

1j4h8dmk]

[Negentropic]

[/tab]

.


Fluoride Deception


[youtube:3i7f86wx]http://www.youtube.com/watch?v=Q3y8uwtxrHo[/youtube]3i7f86wx]

[youtube:3i7f86wx]http://www.youtube.com/watch?v=7hW0_UMtsb4[/youtube]3i7f86wx]

[youtube:3i7f86wx]http://www.youtube.com/watch?v=5NFOnQQMnx4[/youtube]3i7f86wx]

.
.

[/tab]

.
.
Dr. Russell Blaylock

Fluoride
[youtube:1s7d23n1]http://www.youtube.com/watch?v=txadhWB29WU[/youtube]1s7d23n1]

Aspartame
[youtube:1s7d23n1]http://www.youtube.com/watch?v=kssi18OTuS0[/youtube]1s7d23n1]

Vaccines
[youtube:1s7d23n1]http://www.youtube.com/watch?v=XeW9ezs_1SI[/youtube]1s7d23n1]


[youtube:1s7d23n1]http://www.youtube.com/watch?v=bc7DL1ghYEA[/youtube]1s7d23n1]

Swine Flu
[youtube:1s7d23n1]http://www.youtube.com/watch?v=_DwXXbZfmTs[/youtube]1s7d23n1]
.
.

[Wimpy]

First Video discusses Grand Rapids MI as the first City to test the idiots.  I grew up there just when they started.

Main reason I distill all my drinking and cooking water now.  And it really does cause dental problems: Not help them.

Also why I'm mildly retarded. :wtf:

[Wimpy]

But seriously folks, a friend just emailed me stating that they had developed a thyroid problem and it was likely (Doctor said this) caused by fluoride in drinking water.  I'm actually stunned that a medical Doctor would admit to this even though the information is commonly accepted among we tin foil hat types.

My friend, barely a novice re: real world info, vaguely remembered me mentioning that I distill my water because of fluoride.  NOW the information I had shared a couple of years ago becomes pertinent.  And so it goes...unfortunately it often takes real life trauma to effect knowledge and cause change.

[Christopher Marlowe]

First Video discusses Grand Rapids MI as the first City to test the idiots.  I grew up there just when they started.

Main reason I distill all my drinking and cooking water now.  And it really does cause dental problems: Not help them.

Also why I'm mildly retarded. :wtf:

I've heard that reverse osmosis is the only way to get rid of fluoride.  Is that what you use?

[Wimpy]

Ditillation is what I use and that process leaves everything behind but volatiles with a boiling point lower than H2O.  Fluorosilicic acid, the most common additive to water supplies:

Fluoride is not released from water when it is boiled or frozen. One exception would be a water distillation system. These systems heat water to the boiling point and then collect water vapor as it evaporates. Water distillation systems are typically used in laboratory installations. For home use these systems can be expensive and may present safety and maintenance concerns.

Molecular formula: H2SiF6 Relative molecular mass: 144.09 Character: Its water solvent is colorless transparent fuming liquid,the relative density:about 1.32%, boiling point: 108.5oC. It has pungent smell,volatilization and disinfection,soluble in water.

Notice that the boiling point is "slightly" higher than water; sneaky bastards.  High enough not to evaporate through distillation.

NON-FLUORIDATED WATER

Industrial quality reverse osmosis water brings the total dissolved solids down to less that one part per million for all the pollutants that might be in there. Distilled water will remove 99% of the fluoride all of the time. I also recommend a pre-charcoal filter on a distiller to remove volatiles so that you are not getting noxious gases in your home. These are worse when you inhale them than when you drink them, because they go right into your blood stream and into your lungs. You can buy your water at the supermarket, but quite frankly you don't know what the quality of the water is. You must take care that the fluoride concentration is less than 0.2 ppm. Some spring waters like Vichy (which contains 8 ppm) are notoriously high in fluoride. Avoid beverages such as soft drinks, beer and fruit juices from concentrate that have been bottled in fluoridated areas. Teas, even brewed in fluoride-free water will contain about 1.2 to 2.4 ppm fluoride. Some people drink 8 to 15 cups of tea a day, and these amounts are large enough to cause dental fluorosis and other harmful effects.

http://www.energyfortoday.com/new312755.html

If you stop taking fluoride, your body will get rid of it eventually. The fluoride that gets stuck in your bones gets stuck there for life pretty much, but that is not necessarily bad. Where fluoride has adverse effects is in the soft tissues. If you take over 200 mg of vitamin C per day that is all you really need for removing fluoride. In three to six months you should have about 99% of it out which is good enough.

http://www.energyfortoday.com/new312755.html

Over 50% of the communities in the United States use fluorosilicic acid (H2SiF6) or sodium fluorosilicate (Na2SiF6) to fluoridate drinking water. Neither the USEPA nor U.S. Centers for Disease Control and Prevention can provide one safety study proving the product is safe for long-term, low-level consumption. Not one clinical study with animal models has ever been done with the products.

Both fluorosilicic acid (FSA) and sodium fluorosilicate (SFS) are derived from pollution scrubbing operations from phosphoric acid production. The pollution scrubber liquor is a unique product derived from a specific process with unique toxicological characteristics. The presence of chlorides, amines, diesel fuel, kerosene, sulfides, reagents, metals (including arsenic, lead, aluminum, uranium-238 and its decay rate products, etc.), phosphorus and other toxic reactants create a specific product in which FSA is the active ingredient. FSA only comprises about 23% of the total pollution concentrate. It is a highly corrosive acid which can react with most organic and inorganic substances to form many different complexes and possibly very toxic fluorides. I state again, not one safety study has been done with these particular products.

There are many factors involved in the creation of the FSA. Once an insight is gained about how the phosphoric acid is made, the FSA becomes even more frightening. Other chemicals are added such as oil based defoamers (possibly containing dioxins), polymers, petroleum products, naphthalene, chlorides, sulfides, Synspar and various reagents. During the phosphoric acid concentration processes, these added chemicals and inherent toxic contaminants common in phosphate rock are boiled off the acid in a partial vacuum at very high temperatures, about 500 degrees F. The vapors from all these chemicals are washed and captured in the pollution scrubbers along with the fluorine and fluorosilicate gases.

http://www.nearsightedness.org/doctors/doctors13.htm


AND the Distiller I use is:

http://www.nutriteam.com/servlet/the-3/ ... ter/Detail

[Wimpy]

Christopher, let's examine the following statement:

NON-FLUORIDATED WATER

Industrial quality reverse osmosis water brings the total dissolved solids down to less that one part per million for all the pollutants that might be in there. Distilled water will remove 99% of the fluoride all of the time. I

Currently the tap water in my dwelling has 6.4 PPM (parts per million) of H2SiF6.  I personally obtained this figure from Mr. Jeff Childers-Operations Manager at the Dyal Water Treatment Plant in Brevard/Orange County FL, which produces my water.  I know Mr. Childers through years of business transactions.  The 6.4 PPM is also 6.4 mg (milligrams) per liter (1000 grams H2O).

If one uses Reverse Osmosis and it reduces solids down to 1 PPM the the net H2SiF6 (Fluorosilicic Acid) is now 1 PPM, reduced down from 6.4 PPM.  In percentages this is a 84% reduction.  Water distillation eliminates 99% of the solids present which means:  .01 X 6.4 PPM = .064 PPM

Therefore distallation leaves .064 PPM versus 1 PPM with Reverse Osmosis.  Or, in percentages, 93.6% less Fuorosilicic Acid with Distillation versus Reverse Osmosis in my example.  Now, I have not tested my distilled water and I am using generalized results but I do feel better about distillation based on these general efficiencies between RO and Distilling.  BTW, the general level of H2SiF6 added is 6 PPM nationwide.

Over 50% of the communities in the United States use fluorosilicic acid (H2SiF6) or sodium fluorosilicate (Na2SiF6) to fluoridate drinking water. Neither the USEPA nor U.S. Centers for Disease Control and Prevention can provide one safety study proving the product is safe for long-term, low-level consumption. Not one clinical study with animal models has ever been done with the products.

This is an alarming bit of information that appears greatly understated.  What this means is that ALL documented studies of Fluoride effects upon animals and plants have been conducted using the fluoride Ionic form of NaF (Sodium Fluoride).  H2SiF6 is also ionic but is: 2H+  +  SiF6-. This SiF6- has not been tested!!!!    I would suspect that SiF6 is much more reactive by a magnitude!  Each negative ION has 6 (SIX) Fluorine atoms instead of one (ONE).  This Fuoroslicic Acid will Etch Glass, dissolve concrete and it is an extremely hazardous substance.

Page 1 of 7
MATERIAL SAFETY DATA SHEET
Fluorosilicic Acid
Section 01 - Chemical And Product And Company Information
Product Identifier .......................... Fluorosilicic Acid
Product Use ................................. Water fluoridation and wood preservation.
Supplier Name............................... ClearTech Industries Inc.
2303 Hanselman Avenue
Saskatoon SK S7L 5Z3
Canada
Prepared By..................................... ClearTech Industries Inc. Technical Department
Phone: (306)664-2522
Preparation Date............................. September 12, 2008
24-Hour Emergency Phone............. 306-664-2522
Section 02 - Composition / Information on Ingredients
Hazardous Ingredients................... Hydrofluorosilicic acid 23-27%
CAS Number................................... Hydrofluorosilicic acid 16961-83-4
Synonym (s).................................... Fluosilicic acid; hydrofluorosilicic acid; hydrofluosilicic acid; hexafluosilicic
acid
Page 2 of 7
Section 03 - Hazard Identification
Inhalation........................................ Irritating to nose, throat, and respiratory system. Material is extremely
destructive to tissue of the mucous membranes and upper respiratory
tract,eyes and skin. Inhalation may result in spasm, inflammation and
edema ofthe larynx and bronchi, chemical pneumonitis and pulmonary
oedema. Symptoms of exposure may include burning sensation, coughing,
wheezing, laryngitis, shortness of breath, headache, nausea and vomiting.
Skin Contact / Absorption.............. Symptoms of exposure to inorganic fluorides may include salivation,
nausea, vomiting, abdominal pain, fever and laboured breathing. Chronic
fluorine poisoning can result in sclerosis of the bones. Calcification of
ligaments, loss of weight, anorexia, anaemia, dental effects. Ingestion of
large doses can cause severe diarrhea, and cramp-like pains.
Eye Contact.................................... Contact may cause ulceration and severe eye damage.
Ingestion........................................ Symptoms may be delayed up to 24 hours depending upon the fluoride ion
concentration. Prevention of absorption of the fluoride ion in cases of
ingestion can be obtained by giving milk, chewable calcium carbonate
tablets or milk of magnesia to conscious victims. Conditions such as
hypocalcaemia, Hypomagnesaemia and cardiac arrhythmias should be
monitored for, since they can occur after exposure.
Exposure Limits........................... ACGIH-TLV: 2.5mg/m3 (as F)
OSHA-PEL: 2.5mg/m3 (as F)
Section 04 - First Aid Measures
Inhalation....................................... Remove victim to fresh air. Give artificial respiration only if breathing has
stopped. If breathing is difficult, give oxygen. Seek immediate medical
attention.
Skin Contact / Absorption............. Remove contaminated clothing. Wash affected area with soap and water.
Seek medical attention if irritation occurs or persists.
Eye Contact................................... Flush immediately with water for at least 20 minutes. Forcibly hold eyelids
apart to ensure complete irrigation of eye tissue. Seek immediate medical
attention
Ingestion........................................Do not induce vomiting. Give large amounts of water. Do not give anything
by mouth to an unconscious or convulsing person. Seek immediate medical
attention.
Additional Information...................Beware of late onset pulmonary edema for up to 48 hours. Treat severe
burns as per hydrofluoric acid exposure with a calcium gluconate jelly.
Page 3 of 7
Section 05 - Fire Fighting
Conditions of Flammability............ Non-flammable
Means of Extinction........................ Product does not burn. Where fire is involved, use any fire fighting agent
appropriate for surrounding material; use water spray to cool fire-exposed
surfaces.
Flash Point................................... Not applicable
Auto-ignition Temperature............. Not applicable
Upper Flammable Limit ................. Not applicable
Lower Flammable Limit.................. Not applicable
Hazardous Combustible Products... Corrosive fumes of hydrogen fluoride and silicon tetrafluoride will occur
when decomposition occurs 105oC.
Special Fire Fighting Procedures.... Wear NIOSH-approved self-contained breathing apparatus and protective
clothing.
Explosion Hazards........................ Not available
Section 06 - Accidental Release Measures
Leak / Spill..................................... Wear appropriate personal protective equipment. Ventilate area. Stop or
reduce leak if safe to do so. Prevent material from entering sewers and
surface water.
Deactivating Materials................... Neutralize with hydrated lime
Section 07 - Handling and Storage
Handling Procedures..................... Use proper equipment for lifting and transporting all containers. Use
sensible industrial hygiene and housekeeping practices. Wash thoroughly
after handling. Avoid all situations that could lead to harmful exposure.
Storage Requirements................... Store in a cool, dry, well-ventilated place. Keep container tightly closed,
and away from incompatible materials. Do not store in glass or stoneware.
Most metals are incompatible.
Page 4 of 7
Section 08 - Personal Protection and Exposure Controls
Protective Equipment
Eyes........................................... Chemical goggles, full-face shield, or a full-face respirator is to be worn at
all times when product is handled. Contact lenses should not be worn; they
may contribute to severe eye injury.
Respiratory................................. A NIOSH approved cartridge respirator with full-face shield. Chemical
cartridge should provide protection against acid fumes (hydrogen fluoride).
For concentrations greater than 20ppm, a NIOSH approved self-contained
breathing apparatus with full-face shield should be used.
Gloves........................................ Impervious gloves of chemically resistant material (rubber or PVC) should
be worn at all times. Wash contaminated clothing and dry thoroughly
before reuse.
Clothing...................................... Body suits, aprons, and/or coveralls of chemical resistant material should
be worn at all times. Wash contaminated clothing and dry thoroughly
before reuse.
Footwear..................................... Impervious boots of chemically resistant material should be worn at all
times.
Engineering Controls
Ventilation Requirements............... Mechanical ventilation (dilution or local exhaust), process or personnel
enclosure and control of process conditions should be provided. Supply
sufficient replacement air to make up for air removed by exhaust systems.
Other........................................... Emergency shower and eyewash should be in close proximity.
Section 09 - Physical and Chemical Properties
Physical State................................. Liquid
Odor and Appearance.................... Colourless to pale yellow liquid with a pungent odour
Odor Threshold............................... Not available
Specific Gravity (Water=1).............. 1.234 @ 25% concentration
Vapor Pressure (mm Hg, 20C)......... 24 at 25°C
Vapor Density (Air=1)..................... Not available
Evaporation Rate............................ Not available
Boiling Point.................................... 105°C
Page 5 of 7
Freeze/Melting Point....................... -15°C
pH.................................................... 1.2 for a 1% solution
Water/Oil Distribution Coefficient.... Not available
Bulk Density................................... 10.29lbs/gal @ 25% concentration
% Volatiles by Volume.................... Not available
Solubility in Water.......................... Completely miscible
Molecular Formula.......................... H2SiF6
Molecular Weight............................ 144.08
Section 10 - Stability and Reactivity
Stability................................................. Stable under normal conditions.
Incompatibility...................................... Metals, glass, alkali, ceramics, and strong concentrated acids. Strong
concentrated acids will cause the liberation of poisonous hydrogen
fluoride. Hydrofluorosilicic acid will attack glass and ceramics. Metals
will be corroded and liberate hydrogen gas.
Hazardous Products of Decomposition.. Stable at room temperature. Attacks glass and stoneware.
Decomposes to form hydrogen fluoride and silicon tetrafluoride when
heated. Heat is generated when product is added to water.
Polymerization......................................Will not occur
Section 11 - Toxicological Information
Irritancy.......................................... Product is corrosive.
Sensitization...................................Not available
Chronic/Acute Effects................... Liquid or vapours can cause burns which may not be apparant for hours.
Prolonged exposure can result in: bone changes; corrosive effect on
mucous membranes; ulceration of nose, throat, and bronchial tubes;
cough, shock, pulmonary edema, fluorosis, coma, and death.
Synergistic Materials...................... Not available
Animal Toxicity Data...................... LD50(oral,guinea pig) = 200mg/kg
LD50(oral,rat) = 90mL/kg
Page 6 of 7
Carcinogenicity.............................. IARC: Group 3 carcinogen (listed as ** undefined **).
Reproductive Toxicity.................... Not available
Teratogenicity................................ Not available
Mutagenicity...................................Not available
Section 12 - Ecological Information
Fish Toxicity................................... Not available
Biodegradability.............................. Not available
Environmental Effects................... Not available
Section 13 - Disposal Consideration
Waste Disposal............................... Dispose in accordance with all federal, provincial, and/or local regulations
including the Canadian Environmental Protection Act.
Section 14 - Transportation Information
TDG Classification
Class............................................ 8
Group.............................................. II
PIN Number......................................UN 1778
Other............................................ Secure containers (full and/or empty) with suitable hold down devises
during shipment.
Section 15 - Regulatory Information
WHMIS Classification.......................E, D1
NOTE: THE PRODUCT LISTED ON THIS MSDS HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE
HAZARD CRITERIA OF THE CANADIAN CONTROLLED PRODUCTS REGULATIONS. THIS MSDS
CONTAINS ALL INFORMATION REQUIRED BY THOSE REGULATIONS.
NSF Certification.................................Product is certified under NSF/ANSI Standard 60 for fluoridation at a
maximum dosage of 6mg/L.
Page 7 of 7
Section 16 - Other Information
Note: The responsibility to provide a safe workplace remains with the user. The user should consider the health
hazards and safety information contained herein as a guide and should take those precautions required in an
individual operation to instruct employees and develop work practice procedures for a safe work environment. The
information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions
of handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages
incurred by the use of this material. It is the responsibility of the user to comply with all applicable laws and
regulations.
Attention: Receiver of the chemical goods / MSDS coordinator
As part of our commitment to the Canadian Association of Chemical Distributors (CACD) Responsible
Distribution® initiative, ClearTech Industries Inc. and its associated companies require, as a condition of sale, that
you forward the attached Material Safety Data Sheet(s) to all affected employees, customers, and end-users.
ClearTech will send any available supplementary handling, health, and safety information to you at your request.
If you have any questions or concerns please call our customer service or technical service department.
ClearTech Industries Inc. - Locations
Corporate Head Office: 2302 Hanselman Avenue, Saskatoon, SK, S7L 5Z3
Phone: 306-664-2522
Fax: 306-665-6216
http://www.ClearTech.ca
Location Address Postal Code Phone Number Fax Number
Richmond, B.C. 12431 Horseshoe Way V7A 4X6 604-272-4000 604-272-4596
Calgary, AB. 5516E - 40th St. S.E. T2C 2A1 403-279-1096 403-236-0989
Edmonton, AB. 11750 - 180th Street T5S 1N7 780-452-6000 780-452-4600
Saskatoon, SK. 2302 Hanselman Avenue S7L 5Z3 306-933-0177 306-933-3282
Regina, SK. 555 Henderson Drive S42 5X2 306-721-7737 306-721-8611
Winnipeg, MB. 340 Saulteaux Crescent R3J 3T2 204-987-9777 204-987-9770
Mississauga, ON. 7480 Bath Road L4T 1L2 905-612-0566 905-612-0575
24 Hour Emergency Number - All Locations - 306-664-2522

[Wimpy]

Interesting tidbit regarding the reactivity of Fluorine.  Valium (Diazepam), an often over prescribed sedative, has the following chemical name:

7-chloro-1,3-dihydro-
1-methyl-5-phenyl-
1,4-benzodiazepin-2(3H)-one

If a chemical process Substitutes the Chlorine atom (the number 7 preceding the chloro is a Position designation not a Quantity designation) with one Fluorine atom and one added Nitro group, one ends up with a NEW drug called Flunitrazepam or commonly known as the DATE RAPE drug Rohypnol.  Ruffies-50 times stronger in it's sedative effect that Valium.  Knocks a person out with the added bonus of memory loss.

I'm just trying to illustrate that Fluorine is an extremely reactive element and it will displace Calcium and Chlorine atoms in the Human body: Permanently.

The antibiotics Ciporol and the 2nd generation Levoquin are essentially ordinary anti-biotics with a Fluorine atom added.  If a Doctor prescribes these anti-biotics REFUSE them.  Do a search on these and discover the extreme adverse reactions, often permanent, such as torn ligaments and bone breakages in healthy young adults (Brittle bones and ligaments  due to Fluorine substituting for Calcium).  Doctors are now supposed to ask whether or not you are "physically" active prior to prescribing!

[Wimpy]

CLEAR TECH INDUSTRIES-Saskatoon

Company Overview

ClearTech Industries Inc. distributes chemicals, chemical feed and process equipment, instrumentation, and laboratory products in Canada. It offers various chemical products, including acids, alkali, coagulants and flocculants, de-chlorination, disinfectants, enzymes, filtration, oxidants, and membrane products for use in boiler and cooling tower, general, industrial and municipal waste and water, membrane treatment, pretreatment, process water, swimming pools, and ultra pure applications. The company also provides blower and vacuum systems, chemical and chlorine handling equipment, flow and sampling equipment, metering pump accessories, mixers, on-line instrumentation, portable and laborato...

ClearTech Industries Inc. distributes chemicals, chemical feed and process equipment, instrumentation, and laboratory products in Canada. It offers various chemical products, including acids, alkali, coagulants and flocculants, de-chlorination, disinfectants, enzymes, filtration, oxidants, and membrane products for use in boiler and cooling tower, general, industrial and municipal waste and water, membrane treatment, pretreatment, process water, swimming pools, and ultra pure applications. The company also provides blower and vacuum systems, chemical and chlorine handling equipment, flow and sampling equipment, metering pump accessories, mixers, on-line instrumentation, portable and laboratory equipment, scales and weighing equipment, and tanks. It serves municipal drinking and wastewater treatment, tar sands, oil refineries, petrochemical, food processing plants, mining and smelting, and pulp and paper industries. The company was formerly known as PrairieChem, Inc. and changed its name in 2000. ClearTech Industries Inc. was founded in 1977 and is based in Saskatoon, Canada.
Detailed Description

2302 Hanselman Avenue

Saskatoon, SK S7L 5Z3

Canada

Founded in 1977

Phone:

306-664-2522

Fax:


888-281-8109

http://www.cleartech.ca
Key Executives

ClearTech Industries Inc. does not have any Key Executives recorded.

Our History

ClearTech had its origins as Prairie Industrial Chemicals Ltd. which was founded in 1977 to distribute chemicals from a Saskatoon chlor-alkali manufacturer. A corporate re-organization in 1992 turned Prairie Industrial Chemicals into a holding company, and PrairieChem Inc. took over the original chemical business.

While originally active in Canada's three Prairie provinces, acquisitions as well as internal growth expanded the geography that the company covered. Canadian Miraclean Products, a bleach manufacturer and chlorine packager located in Richmond, British Columbia, was acquired in 1996. Fryston Canada Inc., an Ontario based distributor of water treatment instrumentation and industrial air and vacuum systems, joined two years later. In 2000, the company acquired the business of Carbon and Filtration Products of Toronto.

These companies continued to operate under their own name until 2000, when PrairieChem adopted the current name, ClearTech Industries Inc. and established it as the common corporate identity at all locations.

The following year, ClearTech reached an agreement with Welland Chemicals Ltd. to assume the management of Welland's chlorine business in Ontario and Quebec.

Today, ClearTech is a name recognized throughout Canada for Responsible Distribution of chemical products, as well as analytical and process equipment.

http://investing.businessweek.com/resea ... d=30854441

Vincent Tsang

Title
    --
Demographic info
    Vancouver, Canada Area | Chemicals

Current:
    Branch Manager at ClearTech Industries Inc.
Past:
    Technical Sales at BetzDearborn Canada Ltd. (now part of a General Electric company), Project Manager at PrairieChem Inc.
Education:
    The University of British Columbia, UBC Sauder School of Business, UBC Applied Science and Engineering, UBC Science
Summary:
    A professional engineer having over 15 years of business and project management experience.

http://ca.linkedin.com/pub/dir/vincent/tsang

GE affiliation appears to be involved with this Company.  GE is well known as always being a Jewish owned and operated business like ALCOA Aluminum.  The affiliation is being kept way below the radar.

[Jenny Lake]

This is a fluoride thread from the archive, May 2008 viewtopic.php?f=18&t=561
and here's a snip from the first post

" Much of the original proof that fluoride is safe for humans in low doses was generated by A-bomb program scientists, who had been secretly ordered to provide "evidence useful in litigation" against defense contractors for fluoride injury to citizens. The first lawsuits against the U.S. A-bomb program were not over radiation, but over fluoride damage, the documents show."

" Human studies were required. Bomb program researchers played a leading role in the design and implementation of the most extensive U.S. study of the health effects of fluoridating public drinking water--conducted in Newburgh, New York from 1945 to 1956. Then, in a classified operation code-named "Program F," they secretly gathered and analyzed blood and tissue samples from Newburgh citizens, with the cooperation of State Health Department personnel."

" The original secret version--obtained by these reporters--of a 1948 study published by Program F scientists in the Journal of the American Dental Association shows that evidence of adverse health effects from fluoride was censored by the U.S. Atomic Energy Commission (AEC) --considered the most powerful of Cold War agencies-- for reasons of national security."

" The bomb program's fluoride safety studies were conducted at the University of Rochester, site of one of the most notorious human radiation experiments of the Cold War, in which unsuspecting hospital patients were injected with toxic doses of radioactive plutonium. The fluoride studies were conducted with the same ethical mind-set, in which "national security" was paramount. "

" The U.S. government's conflict of interest--and its motive to prove fluoride "safe" -- has not until now been made clear to the general public in the furious debate over water fluoridation since the 1950's, nor to civilian researchers and health professionals, or journalists."

So it seems the government and their contractors had (and still have) a strong fiscal incentive in "whitewashing" the whole fluoride story.

[Christopher Marlowe]

Thanks for all the info Wimpy! :up:

[/tab]

.
.
USA admits adding fluoride to water is damaging teeth and has been a big experiment

[youtube:18c3sm89]http://www.youtube.com/watch?v=Gp3wJjzrrhE[/youtube]18c3sm89]
.
.

[/tab]

.
.
FIRE WATER: Australia's Industrial Fluoridation Disgrace


[youtube:2bp94lyl]http://www.youtube.com/watch?v=6SMKemanUQ8[/youtube]2bp94lyl]

[youtube:2bp94lyl]http://www.youtube.com/watch?v=mf0e1ESRap0[/youtube]2bp94lyl]

[youtube:2bp94lyl]http://www.youtube.com/watch?v=VocPQsdVP3E[/youtube]2bp94lyl]

[youtube:2bp94lyl]http://www.youtube.com/watch?v=eca72vtq8nc[/youtube]2bp94lyl]

[youtube:2bp94lyl]http://www.youtube.com/watch?v=PY__cctlvIk[/youtube]2bp94lyl]

[youtube:2bp94lyl]http://www.youtube.com/watch?v=Hb1K--Anw8g[/youtube]2bp94lyl]

[youtube:2bp94lyl]http://www.youtube.com/watch?v=5grAK6162_w[/youtube]2bp94lyl]

[youtube:2bp94lyl]http://www.youtube.com/watch?v=Hjhe_oN8Dqs[/youtube]2bp94lyl]

[youtube:2bp94lyl]http://www.youtube.com/watch?v=6MeCa3CQhd4[/youtube]2bp94lyl]

.
.

[/tab]

.
.
How Fluoride Causes Hypothyroidism

[youtube:3j9uy0eq]http://www.youtube.com/watch?v=UkJuWLMaoG0[/youtube]3j9uy0eq]



The thyroid gland manufactures the hormones that help control metabolism and growth.



What Causes Overweight and Obesity?

Health Conditions

Some hormone problems may cause overweight and obesity, such as underactive thyroid (hypothyroidism), Cushing's syndrome, and polycystic ovarian syndrome (PCOS).

Underactive thyroid is a condition in which the thyroid gland doesn't make enough thyroid hormone. Lack of thyroid hormone will slow down your metabolism and cause weight gain. You'll also feel tired and weak.

http://www.nhlbi.nih.gov/health/dci/Dis ... auses.html



underactive thyroid (hypothyroidism)
http://www.bupa.co.uk/health-informatio ... ve-thyroid

.
.



Hyper- and hypofunctionImbalance in production of thyroid hormones arises from disfunction of the thyroid gland itself, the pituitary gland, which produces thyroid-stimulating hormone (TSH), or the hypothalamus, which regulates the pituitary gland . . .
http://en.wikipedia.org/wiki/Thyroid_disease


Hypothyroidism [...] is a condition in which the thyroid gland does not make enough thyroid hormone. (a deficiency of thyroid hormone).

Severe hypothyroidism in infants can result in cretinism.
http://en.wikipedia.org/wiki/Hypothyroidism



Neurodevelopmental disorder

A neurodevelopmental disorder, or disorder of neural development, is an impairment of the growth and development of the brain or central nervous system. A narrower use of the term refers to a disorder of brain function that affects emotion, learning ability and memory and that unfolds as the individual grows. The term is sometimes erroneously used as an exclusive synonym for autism and autism spectrum disorders.

Disorders considered to be neurodevelopmental in origin or to have neurodevelopmental consequences when they occur in infancy and childhood include autism and autism spectrum disorders such as Asperger syndrome, traumatic brain injury (including congenital injuries such as those that cause cerebral palsy), communication, speech and language disorders, genetic disorders such as fragile-X syndrome, and Down syndrome. Neurodevelopmental disorders are associated with widely varying degrees of mental, emotional, physical and economic burden to individuals, families and society in general.

http://en.wikipedia.org/wiki/Thyroid_hormone

[/tab]

.
.

[youtube:egscwnqy]http://www.youtube.com/watch?v=U9ZIwQbx70I[/youtube]egscwnqy]

.
.