How To Setup a Wi-Fi Hotspot

[joeblow]

http://www.howtoforge.com/wifi_hotspot_setup

How To Setup a Wi-Fi Hotspot

A How To for DD-WRT, FreeRadius and Chillispot.

Creating a Wi-Fi Internet hotspot service from scratch can seem like a daunting task. I had many sleepless nights trying to get to grips with FreeRadius, DD-WRT, Chillispot etc. I hope that this How To helps you to avoid some of the problems I encountered along the way.

Regards Sean Bracken

********Warning ********

Following these instructions may invalidate your Linksys warranty. You do so at your own risk. These instructions assume that you have an understanding of Linux, PHP MySQL and Apache. If you brick your AP you might get it back by holding down the reset pin for 20 seconds, unplug the power while still holding down the reset button for another 20 seconds and then plugging the power back in while still keeping the reset button held in for a further 20 seconds. This should bring it back to the defaults of whatever firmware you have installed. You should be able to login to 192.168.1.1
*******End of Warning********
Feel free to copy or use this information in any way you like.

What you will need:-

a) DD-WRT
Download the latest version here http://dd-wrt.com

b) FreeRadius
Download the latest version here http://freeradius.org/

c) phpMyPrepaid
Download the latest version here http://sourceforge.net


d) Linsys WRT54GL AP

e) You will also need PHP, Apache, MySQL amd MySql Delopment Modules,(These need to be setup first.) some patience, plenty of coffee and cigarettes.

[K-Sensor]

Thanking you.  It's so important to setup independent networks.  I've been thinking of sharing too but lack the knowledge in the cabling.  like the RF theory to make up my own long cables or where to source cheap pre-made.